Zaccaria Guides

Baron Rubik · Mar 7, 2015

Zaccaria 'Cam Editor' guide (setting up custom user cameras)

Download pdf - https://www.dropbox.com/s/cnizuife7le9hbg/Zaccaria Cam Editor Guide v03.pdf?dl=0

Download Word format - https://www.dropbox.com/s/3lafyumtv6uxqsc/Zaccaria Cam Editor Guide.docx?dl=0

Current ver = V03.0

Thought this thread could be stickied, and other guides added later.
Hint hint - Night, get writing that lighting and physics guide.

Baron Rubik · Mar 7, 2015

Reserved for future use

Baron Rubik · Mar 7, 2015

Reserved for future use II

Jeff Strong · Mar 7, 2015

Stickied. Nice work.

Baron Rubik · Mar 7, 2015

Cheers Jeff

jaredmorgs · Mar 7, 2015

This is good gear, Baron.

Baron Rubik · Mar 7, 2015

jaredmorgs said:
This is good gear, Baron.

Cheers mate, hope it makes sense and you can read it. I'll try and clean up the image clarity for the gui overview. The free editor I use put shadow behind the text and it's not too clear in pdf.

Heretic · Mar 7, 2015

bloody andorid lot showing us ipaddys up!

nice one baron

SilverBalls · Mar 7, 2015

Many thanks baron. Very nicely explained and it cleared up the Camera slide and dead zone or me which I had no clue about. Thanks for the tips too on how to get a minimal moving camera.

Will have a good play with these tonight

IGoFirstIndy · Mar 7, 2015

Baron Rubik said:
Reserved for future use

You sir are a Golden God!

Did a quick glance looks amazing! Can't wait to read and apply with the new update! Thank you!

haj · Mar 8, 2015

Thanks for the effort! Good work!!

jaredmorgs · Mar 8, 2015

Baron Rubik said:
Cheers mate, hope it makes sense and you can read it. I'll try and clean up the image clarity for the gui overview. The free editor I use put shadow behind the text and it's not too clear in pdf.

What was confusing me was that I was getting that blank screen when tweaking the cam settings. You solved that issue for me by explaining that I needed to have a table selected first.

ASK could solve this by putting in an overlay into the app the first time you run the custom editor explaining that you need to select a table first. Or even better, disable or grey-out the cam editor on the main Settings menu to prevent users from selecting it.

This is the same issue I have with a lot of the TPA features: not adequately explained, and no official guide for users.

Your guide is definitely filling that gap.

Flipper bump · Mar 8, 2015

Looks Goood man and it would be nice if Zsolt adds it to the camera menu for the people who just got into zacc camera editing.

Baron Rubik · Mar 8, 2015

Thanks guys!

Been flirting with Landscape mode and Zacc for the first time, and have to say for some tables I'm quite liking it. (I can make the Pinball Champ 82 upper playfield a lot more often).

Just wanted to share, i've found when playing in Landscape, in regards 'Camera Slide' setting, it's best to have the slider at the bottom. Although it goes against my normal Portrait preferences, it means the camera pans towards the flippers quicker for a decending ball. With the 'Camera Slide' set to the top of the range, the camera doesn't pan quickly enough and the ball drains before you can see what's going on down there.

These are my personal prefered settings for Landscape, which I've assigned to be Camera 5. Give it a try.

xAzatothx · Mar 8, 2015

Thanks for this Baron - very useful. I'd discounted anything other than Camera "1" as I found the scrolling camera nauseating and couldn't really understand the custom camera settings.

Using your portrait settings are actually pretty good. Gives more of a top down view compared to default camera 1 and very little scrolling. Liking it so far, especially on my favourite table "Space Shuttle".

Baron Rubik · Mar 9, 2015

xAzatothx said:
Thanks for this Baron - very useful. I'd discounted anything other than Camera "1" as I found the scrolling camera nauseating and couldn't really understand the custom camera settings.

Using your portrait settings are actually pretty good. Gives more of a top down view compared to default camera 1 and very little scrolling. Liking it so far, especially on my favourite table "Space Shuttle".

Cheers mate - you can set the view to be as top down as you like it with the custom cam.
Another tip if you prefer minimal movement, is to set the 'lower view' and 'top view' to be as close to each other visually as you can make them. This makes the pan almost negligible if that's your preference.

IGoFirstIndy · Mar 12, 2015

is there a way to stop the camera from scrolling up and down?

Baron Rubik · Mar 12, 2015

IGoFirstIndy said:
is there a way to stop the camera from scrolling up and down?

Camera 1 is fixed, but not customisable.

If playing in portrait, set cam to 4, in custom editor with first camera view ticked, make both lower and top views as similar as possible. Also set 'camera slide' to the top of its slider, and 'Deadzone' to the bottom of its slider.
This'll give you minimum camera pan. But it's not fixed.

If you download the guide in first post of this thread, there's pics of the settings to achieve this, and explanations of what the controls do.

IGoFirstIndy · Mar 12, 2015

Baron Rubik said:
Camera 1 is fixed, but not customisable.

If playing in portrait, set cam to 4, in custom editor with first camera view ticked, make both lower and top views as similar as possible. Also set 'camera slide' to the top of its slider, and 'Deadzone' to the bottom of its slider.
This'll give you minimum camera pan. But it's not fixed.

If you download the guide in first post of this thread, there's pics of the settings to achieve this, and explanations of what the controls do.

I downloaded the guide. Was very helpful. Thanks!

Would love to have a stationary cam option.

Baron Rubik · Mar 12, 2015

IGoFirstIndy said:
I downloaded the guide. Was very helpful. Thanks!

Would love to have a stationary cam option.

Would definitely be a good and popular addition if the Ask team had time.
What we have now is awesome though.
Can't look at or play TPA anymore.

Zaccaria Guides

New member

New member

New member

Moderator

New member

Moderator

New member

New member

Active member

New member

New member

Moderator

New member

New member

New member

New member

New member

New member

New member

New member