2 monitor config

[slippytoad]

i have 2 monitors but what i want to ideally do is use the 3 screen set up so that i can have the backglass and DMD share the second screen so that i can resize the DMD- is this possible?

currently the DMD looks too stretched on my second monitor (27 inch @ 1920x1080) and on some tables, the graphics around the DMD (excluding the backglass) look a bit low res.

i've tried the 3 monitor config but i can't seem to move the DMD to the second monitor. i see it as a minimised window but i can't get it to appear on either screen

anyone with 2 screens managed to do this?

 

[Sebinouse]

I currently uses the 3 monitor config on my 2 monitors pincab.

I have a 1280x1024 screen at the left of a 10800x1920 screen (same top) in the windows configuration.

I set the Back Glass to x = -1280 , y = 0, w = 1024, h = 800
I set the DMD to x = - 980, y = 820 , w = 640, h = 160

 

[slippytoad]

I currently uses the 3 monitor config on my 2 monitors pincab.

I have a 1280x1024 screen at the left of a 10800x1920 screen (same top) in the windows configuration.

I set the Back Glass to x = -1280 , y = 0, w = 1024, h = 800
I set the DMD to x = - 980, y = 820 , w = 640, h = 160

thanks - finally got it working when i realised that my second monitor is orientated to the right of the main one within windows (i physically have it positioned to the left) Once i set the 'left' coordinates for the backglass and DMD to positive values it worked brilliantly

DMD looks so much better now and with the added benefit that the DMD now works on tables like CFTBL, TOTAN, TOM etc which don't work in the 2 monitor configuration