Reply to thread

Message: <blockquote data-quote="gust334" data-source="post: 276044" data-attributes="member: 7347">In the course of testing cabinet beta v1.70.28d today, I was able to reproduce the reported issue in this thread.  And I confirmed an identical behavior with cabinet release v1.70.27.In my case, if I use the configuration utility to set DX11 Fullscreen mode, then I get a black screen instead of the initial playfield/menu screen.  The DMD and backglass, which are on different physical monitors, appear normally.  The instant I use Alt-Tab to switch to any task, the playfield/menu appears normally.  It doesn't matter if I switch to a TPA task or a third-party program (Notepad, Windows Task Manager, etc.)But, when I use the configuration utility to set DX11 Windowed mode, then all three screens appear normally and on top of other windows at TPA cabinet launch.  I do not need to Alt-Tab anywhere.When I run cabinet mode in DX11 Windowed, the windows appear borderless.  I can butt them together or even adjust them to overlap.  So I don't see any particular advantage to running fullscreen vs. windowed, at least on my system.FYI, Windows 10 Home 64-bit, fully patched and current, with three physical 1920x1080p screens.</blockquote>

No members online now.

Total: 54 (members: 0, guests: 54)