Reply to thread

Message: <blockquote data-quote="Justin2097" data-source="post: 99033" data-attributes="member: 3050">I'm not sure you could map the plunger to a button hold. The sixaxis app let's you map a swipe to a button but then you'd have no control over power. The way mine is set up only launches the ball on certain tables, you still have to launch the other tables via touchscreen. I can't see anyway around it until native controller support is added, unless you use an analogue stick.As for soldering for you, unfortunately this is not something I would be able to do. Mainly because I don't have my own soldering equipment, but also I have pretty much zero soldering skill myself, plus time constraints. I certainly think it's something that nearly anyone can do. The LB/RB buttons have desperate pins which are easy enough to solder to. The main buttons have quite large pads to solder to also, so you don't have to be particularly neat. You can't really go too wrong, solder wires to each button terminal and solder those to the micro switch, terminals it doesn't matter which way around the wires go.</blockquote>

No members online now.

Total: 147 (members: 0, guests: 147)