Reply to thread

Message: <blockquote data-quote="SKILL_SHOT" data-source="post: 72626" data-attributes="member: 837"><p>It looks really good inside and under the PF the wear area is typical and very minimal for not having mylar. After a shop job clean/replace/repair the PF and plastics you have a machine that will last another 30 years. Clean with novus #2 dont bother with #1 a heat gun will work for your plastics but to get even heat id bake them. Clean the inserts under side. krylon triple thick clear will seal your backglass. order replacement bulbs,rubber and any broken stuff and your pretty much good to go. Before you order you may want to shop it just in case something comes up. LEDs will make those inserts POP! Play it for a bit because it will be down for awhile depending how deep you get into cleaning and I think that wood gap is fine.</p></blockquote><p></p>

No members online now.

Total: 634 (members: 1, guests: 633)