Zaccaria Pinball - Mexico '86 (1986) Bugs & Feedback

74-89

New member
May 2, 2014
309
0
Lettering reversed on both sides of cabinet. Sorry if there is another Mexico '86 thread, I couldn't find it.
 

Zorgwon

New member
Sep 14, 2013
614
0
Ball tends to be stuck in the upper (right) eject hole and nudging doesn't help. Calling the attendant makes me lose my ball. Frequency ~5% during normal ball and ~30% on bonus time. When the flipper is inactivated due to time over the risk is very high and the damage to the game is fortunately low.
 
Last edited:

IGoFirstIndy

New member
Jul 12, 2014
1,096
0
Lighting issue - after launching a ball a red light flashes from inside the launch tunnel outlet. It does not flash from the other opening connected to the plunger ramp the ball initially goes into.

This is another table where the current plunger physics make is almost impossible to hit an accurate skill shot.
 

PBallGizard

New member
Jan 30, 2014
184
0
When playing the Game Time Ball, if the time runs out while the ball is in the mini table at the upper left, the mini table flippers quit functioning, but the main flippers and scoring continue until the ball drains.
 

Flipper bump

New member
Jan 20, 2014
755
0
Launcer just doesnt work properly, ball sits on the left or right side from the center position of the rod, takes 5 or 6 plunges to finally eject the ball succesfully.

Please make this work on all tables on the next update, still doesnt work flawless on most of the tables.

9266258a0c720e125ac5b43e5176eaa6.jpg
 

jaredmorgs

Moderator
Staff member
May 8, 2012
4,334
3
When playing the Game Time Ball, if the time runs out while the ball is in the mini table at the upper left, the mini table flippers quit functioning, but the main flippers and scoring continue until the ball drains.
Replicated this bug tonight on Android.
 

PBallGizard

New member
Jan 30, 2014
184
0
IOS update 3.3 - There is still a problem with the Game Time Ball. Now, if time runs out while the ball is in the mini table, all flippers stop like they should and the ball will drain. Another ball will load, even with time at zero, and you will have flipper control again with no time limit.
 

PBallGizard

New member
Jan 30, 2014
184
0
I got a ball stuck on the left side of the table. I *think* that it went through the left bank of targets beneath the mini table. It then traveled up, rolled back down and settled just above the left outlane.
Another issue with this table is that the gate at the bottom of the mini table constantly swings as though a ball has gone through it.
I've never taken Spanish, so can someone translate what the game is saying once I clear the targets in the mini table? It sounds a lot like "whore" to me.

c1e197e3098ae64bd76c100b2a2d2253.jpg
 
Last edited:

Flipper bump

New member
Jan 20, 2014
755
0
I got a ball stuck on the left side of the table. I *think* that it went through the left bank of targets beneath the mini table. It then traveled up, rolled back down and settled just above the left outlane.
Another issue with this table is that the gate at the bottom of the mini table constantly swings as though a ball has gone through it.
I've never taken Spanish, so can someone translate what the game is saying once I clear the targets in the mini table? It sounds a lot like "whore" to me.

c1e197e3098ae64bd76c100b2a2d2253.jpg

Wow youre a PBall Wizzard this never happened on this table but it use to happen more some updates ago last year.
 

Zsolt

A.S.K. Homework
Apr 2, 2013
595
1
I got a ball stuck on the left side of the table. I *think* that it went through the left bank of targets beneath the mini table. It then traveled up, rolled back down and settled just above the left outlane.
Another issue with this table is that the gate at the bottom of the mini table constantly swings as though a ball has gone through it.
I've never taken Spanish, so can someone translate what the game is saying once I clear the targets in the mini table? It sounds a lot like "whore" to me.

c1e197e3098ae64bd76c100b2a2d2253.jpg
Thanks. Made some modifications there on the object. Played some games, looked fixed. The next update will include this fix.
 

Reagan Dow

New member
Jul 23, 2014
1,277
0
IOS update 3.3 - There is still a problem with the Game Time Ball. Now, if time runs out while the ball is in the mini table, all flippers stop like they should and the ball will drain. Another ball will load, even with time at zero, and you will have flipper control again with no time limit.

I had the same thing happen to me
 

xAzatothx

New member
Sep 22, 2012
824
0
Seeing issues on left flipper with lots of lines (nexus 7 2012). IS the is a general issue for all devices or something specific to the Nexus 7? Might be related to my other reported issues.

63761c0ee4.jpg
 

74-89

New member
May 2, 2014
309
0
v3.5 mini-playfield flippers seem to be missing. Can anyone confirm?
 
Last edited:

PBallGizard

New member
Jan 30, 2014
184
0
When an extra ball is earned during the Game Time bonus, Shoot Again lights up, but the Timer continues to count down to zero and then the flippers stop functioning. The extra ball loads, but there is no flipper function because the counter is at zero. Other tables stop counting down when an extra ball is earned, and the ball plays out as normal. Then the last ball plays out the remaining game time.
 

Snorzel

New member
Apr 25, 2014
1,353
0
The sling above the right flipper seems to be trigged too easily by a ball touching low on its face. I would think a cradled ball would settle easier on a real machine
 

Members online

No members online now.

Members online

No members online now.
Top