PC - Request Event camera

[Dylan_h]

Hey guys, so I'm brand new to the steam/PC side of things and I've come across a problem that I can't seem to solve. My PC specs aren't fantastic so I've done my best to scale everything back but I can't get the flyover stuff to stop from happening. Turning event camera on and off does nothing so whenever the ball is on the top of the table the camera follows.
Am I missing something really obvious?

 

[LeRoy3rd]

I'm not at compy at the moment, but I believe "c" changes camera view, and "v" locks or unlocks the view it's on. Might be wrong, if that doesn't work, check keyboard bindings in options.

 

[Sean DonCarlos]

Hey guys, so I'm brand new to the steam/PC side of things and I've come across a problem that I can't seem to solve. My PC specs aren't fantastic so I've done my best to scale everything back but I can't get the flyover stuff to stop from happening. Turning event camera on and off does nothing so whenever the ball is on the top of the table the camera follows.
Am I missing something really obvious?

Turn the camera type from "Scrolling" to "Locked".

 

[Dylan_h]

I'm not at compy at the moment, but I believe "c" changes camera view, and "v" locks or unlocks the view it's on. Might be wrong, if that doesn't work, check keyboard bindings in options.

I'm also not near my comp right now but I'll try this. Thanks!

 

[Dylan_h]

Turn the camera type from "Scrolling" to "Locked".

I know that option is available on mobile but I don't see it in the menu system on the PC. The only options I've seen are event camera and multiball camera.

 

[Alex Atkin UK]

Not sure if its in the menu but as mentioned above there is DEFINITELY a key mapped to it but I cannot remember off the top of my head. Check the keyboard mappings in the menu, it should tell you.

 

[Dylan_h]

Not sure if its in the menu but as mentioned above there is DEFINITELY a key mapped to it but I cannot remember off the top of my head. Check the keyboard mappings in the menu, it should tell you.

Thanks I'll do that

 

[pm1109]

I have the same problem.Is there a solution?

 

[mpad]

I don't know if it was mentioned, but the disable event camera is in the table settings. So start a table and then it is available in the menu. It is a global setting though, so you only have to do it once. Lock camera is mapped to a button and you can see the lock symbol on the hud when enabled.
With both set you only have the plunger and Backglas cam movement left, which is ok.

 

[FlippyFloppy]

I have the same problem.Is there a solution?

By default, the "V" key will lock the camera from going to the upper playfield. However event cameras will still activate if you have the settings to On. Also some event cameras override this simply because the back glass needs to be focused on in the event such as Scared Stiff or Circus Voltaire. Event cameras that can be turned off are generally playfield event cameras such as Dr. Dude Mix Master or the lower playfield view in Black Hole and Haunted House.