Welcome Back to Digital Pinball Fans - please read this first
For latest updates, follow Digital Pinball Fans on Facebook and Twitter

Reply to thread

Message: <blockquote data-quote="seattlemark" data-source="post: 222471" data-attributes="member: 1959">Thanks so much NoEx and Robert for your work related to the latest version of the Mod!  I was able to follow this part of Robert's guide without any problem:"For a two display setup, the resolution of the playfield should be set to 1080x1920 and the backglassmonitor should be setup for 1600x1200.Within your video cards display settings, you must set your backglass monitor above the playfield monitor (which must be set to portrait by the display controls) and centered as best you can manually." However, when I go to the next step in the Guide and try to set  the PBA Configuration utility, on my PC the PBA Config utility for DX11 does not have an entry for  1080x2200.  The closest I can get to it is 1080x2160, and that is throwing off the display division of my backglass/playfield when I use the Mod (but PlayfieldShift does help with this display problem). Any idea why 1080x2200 would not be listed for me?  I am using an NVIDIA GTX 960 graphics card. For my experiment, I am using  an LG 23" monitor for the playfield, and a Samsung SyncMaster 23" monitor for the backglass.  (The LG23" monitor will be substituted with a  large TV monitor once I have this completely working.) (A SyncMaster happens to be the playfield monitor in Robert's guide. )My workaround is to push the PlayfieldShift settings lever all the way up to  the top, moving from the default of 0 up to 30. So far it's helping on the tables I've checked. But if I can get the PBA Config to be at 1080x2200, it may give me some more flexibility to use that PlayFieldShift later.</blockquote>

Verification

Members online

Indy99

Total: 1,021 (members: 1, guests: 1,020)

Latest posts

D
Anyone still playing?
- Latest: Dan
- Mar 3, 2025
The Pinball Arcade / Farsight Studios