-
Welcome Back to Digital Pinball Fans - please read this first
- Status
- Feb 22, 2012
- 4,158
- 1
- Thread starter
- #142
You are correct, the display bug only happens when 2-Ball multi-ball is activated. 3-Ball multiball goes through the correct display sequence. I edited my post above because I found the display bug occurs on every single game you play and activate 2-Ball multi-ball.
Pop Sergeant
New member
- Jul 26, 2012
- 166
- 0
TOSHIBA THRIVE 10.1" TABLET
ANDROID 3.2.1
TEGRA 2
Please excuse use of UPPER CASE. Cutting and pasting from field notes and I don't intend to retype just to spare some sensitive flower's notion that text size is always an implied vocal level - sometimes it's simply an aesthetic choice. I own all tables but only had the time to test those mentioned. I've not had any performance problems specific to my device with any update or DLC since the initial release. I decided to create an account and participate because I've not seen anyone post performance impressions with a Toshiba Thrive. I've been lurking around the forums as a guest for 4-5 months and you all seem like good sorts so until the FB trolls invade I hope to be of some small assistance for those few in the thrive niche. Finally, I've played the early TPA/PHOF tables in situ many times having been a pinhead since the mid-70's and the age of Pong, Vector Graphics, and the Aladdin's Castle arcade franchise and while I am equally enthralled with the newer mission based tables, Far Sight has provided this crusty old Master Sergeant with a veritable "way-back" machine by presenting the older tables of that time and I hope they will continue to keep our demographic in mind as they move forward.
TABLES:
BLACK KNIGHT - 3 BALL MULTIBALL / SPOKEN AUDIO / CUTS OUT IMMEDIATELY AFTER "FIGHT" (*1)
(*1) NOTE: WHEN LOCKING AND STARTING 3-BALL MULTIBALL FROM THE UPPER PLAY FIELD THE WHOLE PHRASE IS SPOKEN; WHEN INITIATING 3-BALL MULTIBALL FROM THE LOWER PLAY FIELD TRAP (SAUCER) ONLY "FIGHT" IS SPOKEN. UPDATE: APPEARS TO BE INTERMITTENT WITH EITHER AN UPPER OR LOWER PLAY FIELD RELEASE; BEST I CAN DETERMINE AT THIS POINT IS A SINGLE LEFT FLIPPER PUSH SEEMS TO TRIGGER INTERRUPT.
BLACK KNIGHT - 2 BALL MULTIBALL / SCORE DISPLAY AS REPORTED BY OTHERS (*2)
(*2) NOTE: I'VE INITIATED 2-BALL MULTIPLE BALL BOTH BEFORE A 3-BALL MULTIBALL AND AFTER AND HAVE NOT REPLICATED THIS PROBLEM ON MY DEVICE.
BLACK KNIGHT - TRAP (SAUCER) / LOWER PLAY FIELD - PHYSICS (*3)
(*3) NOTE: I BELIEVE THAT I NOTED TWO BALLS-IN-PLAY OCCUPY THE SAME PHYSICAL SPACE AT THE SAME TIME WHEN SHOT INTO THE LOWER PLAY FIELD SAUCER IN QUICK SUCCESSION; RELEASE SEEMED TO BE PREDICATED ON THE ARRIVAL OF THE FIRST BALL - BUT THERE WAS A LONG ENOUGH DELAY TO OBSERVE THAT ONLY ONE BALL WAS VISIBLE IN THE TRAP AREA - THE BALLS DID NOT PHYSICALLY INTERACT UNTIL EXITING THE TRAP AREA.
CREATURE FROM THE BLACK LAGOON - NO PROBLEMS NOTED
RIPLEY'S BELIEVE IT OR NOT - NO PROBLEMS NOTED
BLACK HOLE - NO NEW PROBLEMS NOTED (*4)
(*4) NOTE: BOTTOM PLAY FIELD W/ BALL LOCKED - STRONG SHOT TO LOCKED BALL POSITION RESULTED IN BALL IN PLAY JUMPING (TRANSPORTING) TO CENTER OF BOTTOM PLAY FIELD BETWEEN DROP TARGETS AND POP-BUMPER W/O ANY VISIBLE POINT TO POINT TRAVEL. PREVIOUS EXPERIENCE WITH SAME SHOT (MULTIPLE OCCURRENCES) HAS RESULTED IN BALL SENT TO PLUNGER (SINGLE BALL MODE) AND BALL OFF TABLE BUT NOT RECOGNIZED AS LOST (MULTIBALL MODE).
MEDIEVAL MADNESS - NO NEW PROBLEMS NOTED (*5)
(*5) NOTE: FLIPPER ROTATION POINT / SPACING DOES NOT SEEM TO HAVE CHANGED; DRAGON RAMP ACCELERATES BALL UNREALISTICALLY
MONSTER BASH - NO PROBLEMS NOTED (TABLE UPDATE)
APPLICATION:
OPTIONS MENU (TEXTURES) - NO PROBLEMS NOTED SWITCHING BACK AND FORTH
LOGIN - SINGLE OCCURRENCE / REOPENED APP FROM MINIMIZED STATE AND LOGIN DIALOG OPENED OVER SPLASH SCREEN (*6)
(*6) NOTE: UNDER WHAT CONDITION OR DEPENDENCY DOES THE TERTIARY LOGIN DIALOG (FACEBOOK TRACKING YES/NO) ACTUALLY WORK? IS THIS AN EXTERNAL DEPENDENCY ON A 3RD PARTY FB APPLICATION?
TABLET ORIENTATION (PORTRAIT / LANDSCAPE) - ABSOLUTELY NO DIFFERENCE IN FRAME RATE NOTED.
Cheers,
Pop Sergeant
25 July 2012
ANDROID 3.2.1
TEGRA 2
Please excuse use of UPPER CASE. Cutting and pasting from field notes and I don't intend to retype just to spare some sensitive flower's notion that text size is always an implied vocal level - sometimes it's simply an aesthetic choice. I own all tables but only had the time to test those mentioned. I've not had any performance problems specific to my device with any update or DLC since the initial release. I decided to create an account and participate because I've not seen anyone post performance impressions with a Toshiba Thrive. I've been lurking around the forums as a guest for 4-5 months and you all seem like good sorts so until the FB trolls invade I hope to be of some small assistance for those few in the thrive niche. Finally, I've played the early TPA/PHOF tables in situ many times having been a pinhead since the mid-70's and the age of Pong, Vector Graphics, and the Aladdin's Castle arcade franchise and while I am equally enthralled with the newer mission based tables, Far Sight has provided this crusty old Master Sergeant with a veritable "way-back" machine by presenting the older tables of that time and I hope they will continue to keep our demographic in mind as they move forward.
TABLES:
BLACK KNIGHT - 3 BALL MULTIBALL / SPOKEN AUDIO / CUTS OUT IMMEDIATELY AFTER "FIGHT" (*1)
(*1) NOTE: WHEN LOCKING AND STARTING 3-BALL MULTIBALL FROM THE UPPER PLAY FIELD THE WHOLE PHRASE IS SPOKEN; WHEN INITIATING 3-BALL MULTIBALL FROM THE LOWER PLAY FIELD TRAP (SAUCER) ONLY "FIGHT" IS SPOKEN. UPDATE: APPEARS TO BE INTERMITTENT WITH EITHER AN UPPER OR LOWER PLAY FIELD RELEASE; BEST I CAN DETERMINE AT THIS POINT IS A SINGLE LEFT FLIPPER PUSH SEEMS TO TRIGGER INTERRUPT.
BLACK KNIGHT - 2 BALL MULTIBALL / SCORE DISPLAY AS REPORTED BY OTHERS (*2)
(*2) NOTE: I'VE INITIATED 2-BALL MULTIPLE BALL BOTH BEFORE A 3-BALL MULTIBALL AND AFTER AND HAVE NOT REPLICATED THIS PROBLEM ON MY DEVICE.
BLACK KNIGHT - TRAP (SAUCER) / LOWER PLAY FIELD - PHYSICS (*3)
(*3) NOTE: I BELIEVE THAT I NOTED TWO BALLS-IN-PLAY OCCUPY THE SAME PHYSICAL SPACE AT THE SAME TIME WHEN SHOT INTO THE LOWER PLAY FIELD SAUCER IN QUICK SUCCESSION; RELEASE SEEMED TO BE PREDICATED ON THE ARRIVAL OF THE FIRST BALL - BUT THERE WAS A LONG ENOUGH DELAY TO OBSERVE THAT ONLY ONE BALL WAS VISIBLE IN THE TRAP AREA - THE BALLS DID NOT PHYSICALLY INTERACT UNTIL EXITING THE TRAP AREA.
CREATURE FROM THE BLACK LAGOON - NO PROBLEMS NOTED
RIPLEY'S BELIEVE IT OR NOT - NO PROBLEMS NOTED
BLACK HOLE - NO NEW PROBLEMS NOTED (*4)
(*4) NOTE: BOTTOM PLAY FIELD W/ BALL LOCKED - STRONG SHOT TO LOCKED BALL POSITION RESULTED IN BALL IN PLAY JUMPING (TRANSPORTING) TO CENTER OF BOTTOM PLAY FIELD BETWEEN DROP TARGETS AND POP-BUMPER W/O ANY VISIBLE POINT TO POINT TRAVEL. PREVIOUS EXPERIENCE WITH SAME SHOT (MULTIPLE OCCURRENCES) HAS RESULTED IN BALL SENT TO PLUNGER (SINGLE BALL MODE) AND BALL OFF TABLE BUT NOT RECOGNIZED AS LOST (MULTIBALL MODE).
MEDIEVAL MADNESS - NO NEW PROBLEMS NOTED (*5)
(*5) NOTE: FLIPPER ROTATION POINT / SPACING DOES NOT SEEM TO HAVE CHANGED; DRAGON RAMP ACCELERATES BALL UNREALISTICALLY
MONSTER BASH - NO PROBLEMS NOTED (TABLE UPDATE)
APPLICATION:
OPTIONS MENU (TEXTURES) - NO PROBLEMS NOTED SWITCHING BACK AND FORTH
LOGIN - SINGLE OCCURRENCE / REOPENED APP FROM MINIMIZED STATE AND LOGIN DIALOG OPENED OVER SPLASH SCREEN (*6)
(*6) NOTE: UNDER WHAT CONDITION OR DEPENDENCY DOES THE TERTIARY LOGIN DIALOG (FACEBOOK TRACKING YES/NO) ACTUALLY WORK? IS THIS AN EXTERNAL DEPENDENCY ON A 3RD PARTY FB APPLICATION?
TABLET ORIENTATION (PORTRAIT / LANDSCAPE) - ABSOLUTELY NO DIFFERENCE IN FRAME RATE NOTED.
Cheers,
Pop Sergeant
25 July 2012
Last edited:
BeO
New member
- Mar 5, 2012
- 18
- 0
Just a small detail that I've noticed. If you haven't downloaded the table, for example Black Knight in this .apk, the music for that game won't play when you scroll through the tables in the table selection menu. It's the music from the last table that you have already downloaded that keeps playing. Only a minor thing as I said 
Edit: I might add that I so far haven't experienced the BK 2 ball multiball bug other users have reported. SGSII, Android 4.0.3.
Edit: I might add that I so far haven't experienced the BK 2 ball multiball bug other users have reported. SGSII, Android 4.0.3.
Last edited:
- Feb 22, 2012
- 4,158
- 1
- Thread starter
- #145
TPA BETA 1.1.0 installed on HTC EVO 3D running Andriod 2.3.4. Only running apps in the background my phone requires. Phone was reset before running TPA BETA.
Black Hole :
• When you have two balls in play on the lower playfield and one ball re-enters the top playfield, the camera does not zoom out so you can see both the top and bottom playfields...However, the camera does zoom out when the second ball re-enters the top playfield.
• Missing spiral tube the ball falls through to get to the bottom playfield.
• Missing plastics on top of slings on the bottom playfield.
• Missing clear tube ball travels through to get to the top playfield.
• Missing various speech samples when ball hits various objects on the bottom playfield.
• Bumpers should be round and not octagon.
• All digits on display should be lit up with 0's and change as the player scores
• Slingshot animations are missing.
Black Knight :
• Activating 2-ball multi-ball causes the flashing 2's to stay on the display for the duration of the current game...The display never goes back to showing your score when you lose a ball during 2-ball multi-ball. The display resets only when you start a new game.
• ROM sound samples should not overlap each other...New sound should cancel the previous sound.
• Black Knight speech should play in full with no other sounds playing...Other sounds should not cancel Black Knight speech.
• All digits on display should be lit up with 0's and change as the player scores...The 1 digit should light on the right side of the digit light instead of the left side.
• Bottom right flipper does not pivot from the correct axis point on the round end of the flipper.
Cirqus Voltaire :
• Ball is underneath plunger graphic instead of in front of it while in the plunger lane.
• Slingshot animations are missing.
• High wire ramp missing decal.
• Missing wire ball guides underneath flippers.
• Cannon ball periodically shoots out of the top of the backbox...Cannon ball is reset and mode continues.
• Logo on right side of backbox is backwards, but artwork is correct.
Creature from the Black Lagoon :
• Right flipper does not pivot from the correct axis point on the round end of the flipper.
• Slingshot animations are missing.
Funhouse :
• Some framerate lag with HUD on...No lag with HUD off. Texture Option set to high/normal makes no difference.
• Slingshot animations are missing.
• Inside of cabinet should be blue.
• Artwork on right side of backbox is backwards.
• Right flipper does not pivot from the correct axis point on the round end of the flipper.
Gorgar :
• Ball is glitching through plunger casing.
• ROM sound samples should not overlap each other...New sound should cancel the previous sound.
• Gorgar speech should play in full with no other sounds playing...Other sounds should not cancel Gorgar speech.
• Gorgars speech and hearbeat sound seem to be completely absent on random games when playing consecutive games.
• Sound sample that's supposed to play when you light all three top roll-over lights (A, B, C) is missing.
• Drop targets need to be scripted to where the last drop target hit falls and stays hidden for at least half a second before all drop targets reset.
• Both flippers do not pivot from the correct axis points on the round end of the flippers.
• The clear plastic that covers the right orbit lane just behind the spinner is missing.
• The screws are missing from the metal rails leading to the flippers.
• The steel rail at the top of the playfield is missing.
• All digits on display should be lit up with 0's and change as the player scores...The 1 digit should light on the right side of the digit light instead of the left side.
Medieval Madness :
• Fast shot to Merlin Lock travels through the back to the bumpers without locking.
• Flippers are spaced a little too far apart.
• Both flippers do not pivot from the correct axis points on the round end of the flippers.
• Slingshot animations are missing.
• Top four red flashers do not work.
• Dragon wire ramp does not slow down ball before dropping onto inlane.
• Weak shot to the Peasant ramp causes ball to go straight down the middle...Metal guides on ramp have no effect on ball.
• Flag decals on the apron are set too high.
• Draw bridge missing wood graphic on inside of open draw bridge.
• Gate on Damsel Ramp does not drop to allow the ball to travel to the Tower...Shot up the Dragon Ramp still awards a Damsel Rescue.
• Artwork on both sides of the backbox are backwards.
Monster Bash :
• Artwork on right side of backbox is backwards.
• Slingshot animations are missing.
Ripley’s Believe It or Not! :
• Cannot see plunger through hole on top of plunger casing.
• Both orange triangle graphics on apron have an extra “FOR” in the text...Should read “PRESS AND HOLD FLIPPER BUTTON FOR INFO.”
Tales of the Arabian Nights :
• Some framerate lag...Hud enabled/disable and Texture Option set to high/normal makes no difference
• Weak shot to spiral ramp causes the ball to rock back and forth 3-4 times before falling through the hole towards the bottom of ramp. Ball should fall through hole immediately or after 1 pass
• Both flippers do not pivot from the correct axis points on the round end of the flippers.
• Genie magnet activates and moves ball during multi-ball and princess locks...Magnet should not activate during these two locks.
• Ball does not sit directly in front of plunger while in the plunger lane.
• Artwork and logo on left side of the backbox is backwards...Artwork on right side of the backbox is backwards, but logo is correct.
Theatre of Magic :
• Plunger and plunger casing graphics missing.
• Logo on left side of backbox is backwards, but artwork is correct.
• Slingshot animations are missing.
The Machine : Bride of Pin•Bot :
• Some framerate lag with HUD on...No lag with HUD off. Texture Option set to high/normal makes no difference.
• Pin•Bot value lights at top right of playfield do not work.
• Slingshot animations are missing.
• Artwork on both sides of the backbox are backwards.
All Tables :
• All mechanical sounds, except for the flipper sound, have a half second delay.
• The magnet sound is a loud intermitting sound and should be a constant magnetic sound...see Xbox 360 for magnet sound reference.
• Flipper shadows are static...They should be animated and move with the flippers.
• All roll-over sensors should be animated.
• On tables with a manual plunger, after first bounce off the tip of the plunger, ball can be hit without the ball contacting the plunger a second time...The ball should only be able to be hit while in contact with the tip of the plunger.
NOTE : I have highlighted bugs on both Black Hole and Black Knight that you guys may want to correct before releasing the final build.
@Ryan, please take whatever information you need from this post and pass the rest on to the correct person or persons. Thanks.
Black Hole :
• When you have two balls in play on the lower playfield and one ball re-enters the top playfield, the camera does not zoom out so you can see both the top and bottom playfields...However, the camera does zoom out when the second ball re-enters the top playfield.
• Missing spiral tube the ball falls through to get to the bottom playfield.
• Missing plastics on top of slings on the bottom playfield.
• Missing clear tube ball travels through to get to the top playfield.
• Missing various speech samples when ball hits various objects on the bottom playfield.
• Bumpers should be round and not octagon.
• All digits on display should be lit up with 0's and change as the player scores
• Slingshot animations are missing.
Black Knight :
• Activating 2-ball multi-ball causes the flashing 2's to stay on the display for the duration of the current game...The display never goes back to showing your score when you lose a ball during 2-ball multi-ball. The display resets only when you start a new game.
• ROM sound samples should not overlap each other...New sound should cancel the previous sound.
• Black Knight speech should play in full with no other sounds playing...Other sounds should not cancel Black Knight speech.
• All digits on display should be lit up with 0's and change as the player scores...The 1 digit should light on the right side of the digit light instead of the left side.
• Bottom right flipper does not pivot from the correct axis point on the round end of the flipper.
Cirqus Voltaire :
• Ball is underneath plunger graphic instead of in front of it while in the plunger lane.
• Slingshot animations are missing.
• High wire ramp missing decal.
• Missing wire ball guides underneath flippers.
• Cannon ball periodically shoots out of the top of the backbox...Cannon ball is reset and mode continues.
• Logo on right side of backbox is backwards, but artwork is correct.
Creature from the Black Lagoon :
• Right flipper does not pivot from the correct axis point on the round end of the flipper.
• Slingshot animations are missing.
Funhouse :
• Some framerate lag with HUD on...No lag with HUD off. Texture Option set to high/normal makes no difference.
• Slingshot animations are missing.
• Inside of cabinet should be blue.
• Artwork on right side of backbox is backwards.
• Right flipper does not pivot from the correct axis point on the round end of the flipper.
Gorgar :
• Ball is glitching through plunger casing.
• ROM sound samples should not overlap each other...New sound should cancel the previous sound.
• Gorgar speech should play in full with no other sounds playing...Other sounds should not cancel Gorgar speech.
• Gorgars speech and hearbeat sound seem to be completely absent on random games when playing consecutive games.
• Sound sample that's supposed to play when you light all three top roll-over lights (A, B, C) is missing.
• Drop targets need to be scripted to where the last drop target hit falls and stays hidden for at least half a second before all drop targets reset.
• Both flippers do not pivot from the correct axis points on the round end of the flippers.
• The clear plastic that covers the right orbit lane just behind the spinner is missing.
• The screws are missing from the metal rails leading to the flippers.
• The steel rail at the top of the playfield is missing.
• All digits on display should be lit up with 0's and change as the player scores...The 1 digit should light on the right side of the digit light instead of the left side.
Medieval Madness :
• Fast shot to Merlin Lock travels through the back to the bumpers without locking.
• Flippers are spaced a little too far apart.
• Both flippers do not pivot from the correct axis points on the round end of the flippers.
• Slingshot animations are missing.
• Top four red flashers do not work.
• Dragon wire ramp does not slow down ball before dropping onto inlane.
• Weak shot to the Peasant ramp causes ball to go straight down the middle...Metal guides on ramp have no effect on ball.
• Flag decals on the apron are set too high.
• Draw bridge missing wood graphic on inside of open draw bridge.
• Gate on Damsel Ramp does not drop to allow the ball to travel to the Tower...Shot up the Dragon Ramp still awards a Damsel Rescue.
• Artwork on both sides of the backbox are backwards.
Monster Bash :
• Artwork on right side of backbox is backwards.
• Slingshot animations are missing.
Ripley’s Believe It or Not! :
• Cannot see plunger through hole on top of plunger casing.
• Both orange triangle graphics on apron have an extra “FOR” in the text...Should read “PRESS AND HOLD FLIPPER BUTTON FOR INFO.”
Tales of the Arabian Nights :
• Some framerate lag...Hud enabled/disable and Texture Option set to high/normal makes no difference
• Weak shot to spiral ramp causes the ball to rock back and forth 3-4 times before falling through the hole towards the bottom of ramp. Ball should fall through hole immediately or after 1 pass
• Both flippers do not pivot from the correct axis points on the round end of the flippers.
• Genie magnet activates and moves ball during multi-ball and princess locks...Magnet should not activate during these two locks.
• Ball does not sit directly in front of plunger while in the plunger lane.
• Artwork and logo on left side of the backbox is backwards...Artwork on right side of the backbox is backwards, but logo is correct.
Theatre of Magic :
• Plunger and plunger casing graphics missing.
• Logo on left side of backbox is backwards, but artwork is correct.
• Slingshot animations are missing.
The Machine : Bride of Pin•Bot :
• Some framerate lag with HUD on...No lag with HUD off. Texture Option set to high/normal makes no difference.
• Pin•Bot value lights at top right of playfield do not work.
• Slingshot animations are missing.
• Artwork on both sides of the backbox are backwards.
All Tables :
• All mechanical sounds, except for the flipper sound, have a half second delay.
• The magnet sound is a loud intermitting sound and should be a constant magnetic sound...see Xbox 360 for magnet sound reference.
• Flipper shadows are static...They should be animated and move with the flippers.
• All roll-over sensors should be animated.
• On tables with a manual plunger, after first bounce off the tip of the plunger, ball can be hit without the ball contacting the plunger a second time...The ball should only be able to be hit while in contact with the tip of the plunger.
NOTE : I have highlighted bugs on both Black Hole and Black Knight that you guys may want to correct before releasing the final build.
@Ryan, please take whatever information you need from this post and pass the rest on to the correct person or persons. Thanks.
Last edited:
bossyman15
New member
- Feb 28, 2012
- 101
- 0
suggestion about the login system.
You should add the option to remember the username and password so we don't have to reenter them every time we open the app.
also confirmed the 2 ball multiball problem on black knight.
You should add the option to remember the username and password so we don't have to reenter them every time we open the app.
also confirmed the 2 ball multiball problem on black knight.
Last edited:
BeO
New member
- Mar 5, 2012
- 18
- 0
goforthewall
New member
- Feb 21, 2012
- 314
- 0
the new log-in system doesn't work at all for me. I simply can't get it to send me an activation email... although the password *is* hidden while typing on my SGSII
N
Nik Barbour
Guest
I'm struggling to summon the will to Pinball this week, after Tuesdays initial xbox dlc excitement, then on-going release problems, but thought i'd give this a go to cheer myself up.
Single core device. Android 2.3.7 Gingerbread, 1gb Int Mem Device HTC Desire S running MIUI 2.4.2GB (no overclock for testing)
Good Stuff:-
Immediately checked texture was set to normal, tried all tables. All working v-nicely.
Funhouse & BOP now work nice and smoothly with HUD on with zero lag. (v-laggy in 1.0.9)
transition from Landscape to Portrait and vice versa is now seamless (used to be very bad).
Texture switch works perfectly (most noticable in Funhouse).
Bad stuff:-
Apart from the things others have mentioned.....
When downloading the table data for Black knight & Monster bash, the screen with the progress bar for the download was graphically corrupted for both tables.
New login dosn't work 100% if I have Texture High for some reason.
New login if selected 'compare leaderboard scores with Facebook friends' causes force close everytime i've tested (and I only have 2 facebook friends).
General:-
Don't like having to type in email and pass each time you login (thank god for swiftkey x prediction!).
Also - I play TPA on my phone using the 'Sixaxis App' (lets you use PS3 controller) but prior to starting TPA, I have to switch my keyboard to sixaxis, then fire up TPA. But now have to type in email and pass in this version, so I have to long press in dialogue box, switch back to swiftkey, enter details, and remember to long press dialogue to switch back to sixaxis app, prior to pressing 'OK'.
All in all - Really pleased with this beta. Previous version was crippling my GPU in BOP and especially FH (sods law - my favorite tables), but I also noticed Gorgar runs better in this version too.
Still got the xbox blues - but thats another thread!
Excellent job Ryan!- Hope it works as nicely for everyone else!
And...Hope you have a great time celebrating your wifes birthday this weekend!
Single core device. Android 2.3.7 Gingerbread, 1gb Int Mem Device HTC Desire S running MIUI 2.4.2GB (no overclock for testing)
Good Stuff:-
Immediately checked texture was set to normal, tried all tables. All working v-nicely.
Funhouse & BOP now work nice and smoothly with HUD on with zero lag. (v-laggy in 1.0.9)
transition from Landscape to Portrait and vice versa is now seamless (used to be very bad).
Texture switch works perfectly (most noticable in Funhouse).
Bad stuff:-
Apart from the things others have mentioned.....
When downloading the table data for Black knight & Monster bash, the screen with the progress bar for the download was graphically corrupted for both tables.
New login dosn't work 100% if I have Texture High for some reason.
New login if selected 'compare leaderboard scores with Facebook friends' causes force close everytime i've tested (and I only have 2 facebook friends
).General:-
Don't like having to type in email and pass each time you login (thank god for swiftkey x prediction!).
Also - I play TPA on my phone using the 'Sixaxis App' (lets you use PS3 controller) but prior to starting TPA, I have to switch my keyboard to sixaxis, then fire up TPA. But now have to type in email and pass in this version, so I have to long press in dialogue box, switch back to swiftkey, enter details, and remember to long press dialogue to switch back to sixaxis app, prior to pressing 'OK'.
All in all - Really pleased with this beta. Previous version was crippling my GPU in BOP and especially FH (sods law - my favorite tables), but I also noticed Gorgar runs better in this version too.
Still got the xbox blues - but thats another thread!
Excellent job Ryan!- Hope it works as nicely for everyone else!
And...Hope you have a great time celebrating your wifes birthday this weekend!
Last edited:
- May 8, 2012
- 4,334
- 3
Beta is playing well on my TF300T. LOVE the new backglass DMD animation. No option to turn the DMD HUD on Creature off though, so you can't enjoy it. Unless I missed the setting. Will ping the G+ followers as well to alert them of the beta.
bavelb
New member
- Apr 16, 2012
- 1,238
- 0
Hmm strange, on IOS I can turn the hud of in CftBL, needs to be ingame though.
e: and I just noticed the setting doesnt save.
Last edited:
Carl Spiby
New member
- Feb 28, 2012
- 1,756
- 0
New login system doesn't work very well. The fact it doesn't remember your login information and Facebook login still freezes the app.
Why can't you make it a persistant login?
Why can't you make it a persistant login?
Carl Spiby
New member
- Feb 28, 2012
- 1,756
- 0
Erm why are there suddenly adverts in the table of the month?
N
Nik Barbour
Guest
I can turn the HUD off/on in CFTBL on my android!
Ryan Routon
FarSight Employee
- Feb 24, 2012
- 1,394
- 0
First off, let me say you guys are awesome! =) I am very lucky to have such helpful users! I will respond in detail after things settle, but I am looking into the login every time thing and that will be the last thing i can do before the build is released. Stay tuned. (oh also just real quick purchases in the beta should be fine )
- Feb 22, 2012
- 4,158
- 1
- Thread starter
- #159
Did you guys get a chance to squash the Black Hole and Black Knight bugs I highlighted for you?
N
Nik Barbour
Guest
Had a decent go now!
Man I am sooooo addicted to BK.
Man I am sooooo addicted to BK.
- Status