Tann
New member
- Apr 3, 2013
- 1,128
- 1
Lag is present only in 1080i/p resolution. It's ok for all others screen resolutions.
But... HDTV and composite cables? Really?
-
Welcome Back to Digital Pinball Fans - please read this first
Flipper lag theory
- Thread starter superballs
- Start date
Lag is present only in 1080i/p resolution. It's ok for all others screen resolutions.
But... HDTV and composite cables? Really?
ER777
New member
- Sep 8, 2012
- 797
- 0
I'm curious how things turned out, were you able to find a lag-free setup?
The only 100% lag-free experience I've found is on a CRT TV, although at 720p on my LCDs its barely even noticeable (I really need to compare to PHoF or playing on the CRT TV to tell). So if you're lag-free I'd be interested in hearing what kind of TV you have and how its hooked up.
heddhunter
New member
- Sep 29, 2012
- 145
- 0
I just grabbed the latest PS3 update, bought Firepower/Dr.Dude and tested in 720p/1080p with my TV set to "Game" mode. I couldn't detect any difference in controller responsiveness with the standard Sony wireless controller. 1080p looks much nicer on my TV.
Tann
New member
- Apr 3, 2013
- 1,128
- 1
Lag is less noticeable on some tables. Did you tried on much complex tables like ToTAN (the worst laggy table for me), MM, or CV?
+1. There's an obvious drop of graphic quality switching back to 720p. Not a big deal though, but it's annoying to not fully enjoy the TPA experience.
heddhunter
New member
- Sep 29, 2012
- 145
- 0
Just tried all three, they felt fine to me, and I have definitely felt like MM/CV were not as good in the past.
Tann
New member
- Apr 3, 2013
- 1,128
- 1
This is strange, as FS said that the lag fix is still in "work in progress". Maybe a placebo effect?
Thanks for the report, though. I will check when the update will be at last release for EU players.
heddhunter
New member
- Sep 29, 2012
- 145
- 0
ER777
New member
- Sep 8, 2012
- 797
- 0
Probably placebo effect
Agreed, I don't see any difference in flipper lag between this version and the last.
Last edited:
Quartrez
New member
- May 24, 2013
- 11
- 0
My PS3's display setting used to be set at 1080p, and Pinball Arcade would have atrocious flipper lag.
Since I set the display to 720p (or rather "unchecked the 1080p box in the display settings"), the flipper lag has diminished greatly to the point where it's barely noticeable (it's almost as good as Zen Pinball 2).
Since my TV is something like 18", I really don't notice any difference at all between 1080p and 720p in terms of visuals.
Since I set the display to 720p (or rather "unchecked the 1080p box in the display settings"), the flipper lag has diminished greatly to the point where it's barely noticeable (it's almost as good as Zen Pinball 2).
Since my TV is something like 18", I really don't notice any difference at all between 1080p and 720p in terms of visuals.
Deathtickle
New member
- Dec 10, 2012
- 28
- 0
PS3 hooked up by HDMI, running 1080p on a Toshiba 55TL515U with no lag. I dont even run in 'game mode' and everything is fine.
brakel
New member
- Apr 27, 2012
- 2,305
- 1
Then count yourself lucky that you are not sensitive to the lag. It is there. FarSight confirmed it a long time ago. There is no setup that will make it go away. There are setups that will make it worse for sure but nothing will make it go away except for a fix from FarSight.
Tann
New member
- Apr 3, 2013
- 1,128
- 1
On my first games, I used to play in 1080i. I noticed the lag but I thought: "It's not a big deal, I just have to flip earlier".
But one day, I switched to 720p, just to see the difference... Since this day, I can't play anymore in 1080i. The lag makes the game unplayable on a lot of tables.
You really notice no difference between 720p and 1080p??
It's a TV issue, too. I bet on an ASUS monitor, it doesn't lag.
I bought a PS3 and it had input lag with the only game I bought, Darkstalkers Collection. I took it right back to the store (store I work at now, btw). FWIW my 360 also lags on the same TV through HDMI. That's why I use a VGA cable on 360 that eliminates the input lag. It's a 60" Samsung LED in case anyone is wondering.
We run PS3's on ASUS monitors in my gaming circle for fighting games and there is zero lag. I have played PBA on a CRT on PS3 with no lag.
I bought a PS3 and it had input lag with the only game I bought, Darkstalkers Collection. I took it right back to the store (store I work at now, btw). FWIW my 360 also lags on the same TV through HDMI. That's why I use a VGA cable on 360 that eliminates the input lag. It's a 60" Samsung LED in case anyone is wondering.
We run PS3's on ASUS monitors in my gaming circle for fighting games and there is zero lag. I have played PBA on a CRT on PS3 with no lag.
JPelter
New member
- Jun 11, 2012
- 652
- 0
I'm going to go ahead and pipe up that I don't see any lag in either mode either. I use it on the same monitor I use for the PC, a BenQ. I don't remember the model. If there's lag present in either 1080p or 720p I don't see it. I could just be used to it I suppose, but I figured I'd come out and give my experience.
Deathtickle
New member
- Dec 10, 2012
- 28
- 0
I just hooked up to my 42" Samsung and I did experience lag in TPaA
That TV (Samsung) is in the living room which I never really use for gaming although the Wii is hooked up to it.
That said my Toshiba I use for gaming does not seem to have that lag issue.
That TV (Samsung) is in the living room which I never really use for gaming although the Wii is hooked up to it.
That said my Toshiba I use for gaming does not seem to have that lag issue.
Bingo. An Asus or BenQ is not going to lag. (wait aren't these the same? I forget).
JPelter
New member
- Jun 11, 2012
- 652
- 0
I don't think they're the same. At least in finland both asus and benq are sold separately. They might still use the same component manufacturers I suppose if that makes a difference. I haven't looked into it.
ER777
New member
- Sep 8, 2012
- 797
- 0
Most computer monitors and CRT TVs seem to be immune to all but the 1 frame of lag that FS has said is built-in for lighting/rendering. That 1 frame would be barely noticeable if at all anyway. Getting a PC monitor specifically for TPA might be the best solution for some people like me if FS doesn't find a way to resolve this.
Also, if I plug into an old CRT TV using composite AV cables there's no lag. So I know a lag-free set-up is possible on some TVs. Even at 720p on my LCD TVs (with all the optimal settings) there's a tiny bit of lag that's not there on the CRT, but its barely noticeable*. At 1080p its much more noticeable and greatly hinders gameplay, especially on the complex tables with a lot of ramps.
I think that if you had that lag you would definitely notice it, so I doubt its that you're just used to it as some might suggest. So the fact that you're using a PC monitor is probably your saving grace.
*Note: I've got an HDMI-VGA converter coming to try out an old CRT PC monitor @ 1280x720 to see how that works, mostly out of curiosity more than anything, and because that old CRT TV is nearly dead.
SKILL_SHOT
Banned
- Jul 11, 2012
- 3,659
- 1
Besides flipper lag switching from 1080p to 720p makes the table selection alot faster. I have adjusted to the 1080p lag to the point if I switch to 720p I cant make certain shots as predictably MM's catapult on 1080p I can get barnyard multiball with no problems then when I switch to 720p I cant make 1 shot and on the reverse side on TOTAN on 1080p I cant make a orbit shot from a trap to save my life and shooting a ball up the spiral ramp doesn't always make it around but on 720p I can shoot the orbits and the spiral ramp shot almost always complets the loop very quickly.