Discussion thread about the FreeCamera Mod

[NoEx]

V1.70.27 is out. I chose to stay with using the freecammod for my cabinet support. It'll be interesting to see what happens with the future of pinball arcade but for now I feel your contributions are very valuable and most appreciated. Thank you and enjoy the beer.

Thanks a lot for your donation, FreeCamMod v1.92.4 is out : http://www.digitalpinballfans.com/s...ree-Camera-Mod?p=274843&viewfull=1#post274843

 

[valent]

Hello everyone, I bought 2 tables for pinball arcade, ACDC and MUSTANG.
Launching pinballx when loading pinball arcade I get the "table name not faund" error. What are the exact names for the launch and can be modified by editing the freecameramod Direct Table Launch?
Thanks, Valent

 

[GAH1068]

I think it has something to do the new Stern based tables. There are technical issues using these with FCM so they aren't supported. Ghostbusters isn't supported anymore so my guess is ACDC and Mustang are going to be the same for now.

 

[valent]

Let's wait, we'll see.
The tables I can not throw them directly, I mounted a joystick on my pincab, and with that I can move between the various menus and launch them.

valent

 

[NoEx]

Hello everyone, I bought 2 tables for pinball arcade, ACDC and MUSTANG.
Launching pinballx when loading pinball arcade I get the "table name not faund" error. What are the exact names for the launch and can be modified by editing the freecameramod Direct Table Launch?
Thanks, Valent

Hello,

Thanks for the report, I didn't notice these tables have been released, I've just pushed a new mod's version: http://www.digitalpinballfans.com/s...ree-Camera-Mod?p=275539&viewfull=1#post275539

Tables names are "Mustang" and "ACDC".

 

[valent]

Hello,

Thanks for the report, I didn't notice these tables have been released, I've just pushed a new mod's version: http://www.digitalpinballfans.com/s...ree-Camera-Mod?p=275539&viewfull=1#post275539

Tables names are "Mustang" and "ACDC".

Thanks for the change, the launch works perfectly

Valent

 

[nudnick]

Hey NoEx ... hope all is well. TPA has ver 1.70.27 out. Mod needs update.

Thanks!

 

[ilveropaolone]

Hey NoEx ... hope all is well. TPA has ver 1.70.27 out. Mod needs update.

Thanks!

Now is necessary mod for 170.28 version. i hop e that mod implementa also the table disappered because i have all of it! Williams and bally! unfortunately i have no bkup of ha file in vers. 1.70.27. can Anyone supplì me?

 

[NoEx]

Hey NoEx ... hope all is well. TPA has ver 1.70.27 out. Mod needs update.

Thanks!

Hey,

I'm on vacation actually, will update the mod asap. (~1 week delay)

 

[Mike da Spike]

Hey,

I'm on vacation actually, will update the mod asap. (~1 week delay)

Enjoy you holiday NoEx !

 

[NoEx]

New version is out : http://www.digitalpinballfans.com/s...ree-Camera-Mod?p=276425&viewfull=1#post276425

 

[nudnick]

hehe ... your back ... and now I'm out of town. Thanks for all you do NoEx. Your MOD keeps it real.

 

[GAH1068]

[MENTION=5267]NoEx[/MENTION] I am getting a Scan Error box. There was a pattern error while searching launch table routine pattern. FreeCamMod did download the latest updated.

 

[Mike da Spike]

Thanks for the update NoEx !
When I'm home I will give it a try.
Good work !

 

[gust334]

Hi NoEx, today's update seems to be working well for me, vs1.70.28 DX11. And I learned something new... while holding down one or more keys to rotate or translate, I can tap the speed up and down, and it all just works as one would want/expect.

Although I also have the Arcooda Cabinet software, obviously there are some unsupported tables, and your mod is great to play those. Also, since your mod allows the camera to be rotated "sideways", it allows inspecting features of the tables that are otherwise invisible with the TPA exploration mode.

I sure hope you are able to keep this working with future updates of TPA. Beer money sent!

 

[NoEx]

[MENTION=5267]NoEx[/MENTION] I am getting a Scan Error box. There was a pattern error while searching launch table routine pattern. FreeCamMod did download the latest updated.

I've just pushed a new version.

Hi NoEx, today's update seems to be working well for me, vs1.70.28 DX11. And I learned something new... while holding down one or more keys to rotate or translate, I can tap the speed up and down, and it all just works as one would want/expect.

Although I also have the Arcooda Cabinet software, obviously there are some unsupported tables, and your mod is great to play those. Also, since your mod allows the camera to be rotated "sideways", it allows inspecting features of the tables that are otherwise invisible with the TPA exploration mode.

I sure hope you are able to keep this working with future updates of TPA. Beer money sent!

Thanks a lot for your donation!

 

[GAH1068]

[MENTION=5267]NoEx[/MENTION] - Something appears to be broken with your update routine or your update server is down. When I download the new version and run FCM it is saying there is a new version. When I click Yes to download it shows the yellow progress box at 0% for about 5 seconds and then just exits leaving a corrupted 688 byte exectuable. I unrar'd the update and have tried running exe normal and as admin with the same results.

 

[NoEx]

[MENTION=5267]NoEx[/MENTION] - Something appears to be broken with your update routine or your update server is down. When I download the new version and run FCM it is saying there is a new version. When I click Yes to download it shows the yellow progress box at 0% for about 5 seconds and then just exits leaving a corrupted 688 byte exectuable. I unrar'd the update and have tried running exe normal and as admin with the same results.

It should be fixed now.

 

[GAH1068]

It is, thank you!

 

[Sebinouse]

Hello,
Tables names are "Mustang" and "ACDC".

Thanks for the update NoEx !
Do you plan to update the PasteBin.

(BTW I hope you enjoyed your beers during your vacations ! )